Carpet Tech's Floor Care & Restoration Blog

Keep Your Shower Clean

Shower enclosures are a chore to keep clean -- but they can be less of a problem if you follow these guidelines:

• Keep mildew from taking hold by wiping shower walls with a towel after each shower.
• If the shower area is subject to mildew, periodically spray it with a mildew inhibitor and disinfectant.
• Remove hard-water deposits on shower enclosures with a solution of white vinegar and water.
• Glass shower doors will sparkle when you clean them with a sponge dipped in white vinegar.
• Add 1 cup liquid fabric softener to 1 quart warm water, and use to loosen and clean soap scum from shower doors. Do not use on the tub; it will become slippery.
• Remove water spots on the metal frames around shower doors and enclosures with lemon oil.
• Note: Never use harsh abrasive powders or steel-wool pads.

Remember when it is time to have a professional in depth cleaning on your shower call our professionals at Carpet Tech. We can have your shower tile and grout cleaner than ever before!

Keep Your Carpets in Great Shape: Stop Carpet Abuse!

Your carpets take a lot more abuse than you realize, and we're not just talking about the occasional spots and spills. Daily wear and tear can really take its toll on your carpet and shorten its life. Carpeting is an expensive investment and we want to help you protect that investment. Here are a few signs your carpet is in trouble and how to rectify the problems. As always, make sure to have regular professional cleanings at least once a year.

• 1) Sprouting: Shoe nails, pet claws or defective cleaning equipment can pull tufts above the level of the carpet. To prevent additional problems, use a sharp pair of scissors to trim the excess tufts as soon as you notice them.
• 2) Shedding: These short, broken fibers can be trapped during the yarn-making process. After your carpet is installed, they may show up as fuzz. While some is normal in high quality spun yarn, it's best to get these fibers up and out by vacuuming to eliminate the problem.
• 3) Shading: Heavy traffic causes carpet pile to lie in a variety of directions, so tufts remaining upright appear darker than compressed fibers. A thorough vacuuming or combing will rectify the situation so pile wears uniformly.
• 4) Pilling: The small, fuzzy balls that stick to carpet surfaces are caused when strong, unbroken fibers cling to weak ones. Most often, the cause is using old cleaning equipment, so ask your carpet care professional to inspect your vacuum and other cleaning tools. Pets may also be the culprits, too.
• 5) Furniture dents: Finally decided to rearrange the living after 20 years? You can try getting rid of those unsightly dents by holding a steam iron over (never against) the indented pile, then gently brushing the area.